Safety Instructions
CAUTION. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
USER MANUAL AND MARKED ON THE APPLIANCE. RETAIN THIS BOOKLET FOR FUTURE USE.
This set has been designed and manufactured to assure your personal safety. Improper use can
result in Electric shock or Fire hazard. The safeguards in this appliance will protect you if you
observe the correct procedures for installation, servicing and operation. There are NO user
parts inside. DO NOT REMOVE THE CASE OR OTHER COVERS OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGES AND WILL INVALIDATE YOUR WARRANTY. REFER ALL SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Power Supply.
This apparatus is designed to operate from a 100 –
250V AC 50/60 Hz supply. Do NOT connect to an
alternative supply.
Connections
. When connecting the PVR to external sources and the mains supply, do not place wires
that can be tripped over. Do not trap or place heavy objects on the mains lead or adaptor.
Should the mains plug become damaged you may replace by following the instructions on page 26
Ventilation and Heat Sources
. Do not place material over the ventilation slots, this will cause the PVR
to overheat and fail. Do not place the PVR in direct sunlight or
near heat sources such as radiators or
fires.
Moisture.
Do not place the PVR in wet or damp conditions, such as steamy
kitchens, basements or
other damp places. Do not allow water or other fluids to enter the PVR. Do not touch the Mains plug or
adaptor with wet hands. Should moisture enter the PVR, disconnect from the supply and call the
customer help line.
Cleaning.
Disconnect the PVR from the mains supply. Use a soft dry cloth, for stubborn stains use a
soft moist cloth with a dilute mild detergent.. Do NOT use petrol based fluids or abrasive materials.
Transportation.
The PVR has an internal HDD (Hard drive) that is susceptible to shock and vibration.
Do not drop the PVR, only carry in the packaging provided. The HDD is not covered by warranty if
shown to have impact damage.
4
Lightning.
During a thunderstorm or when leaving the appliance for long periods such as holidays, disconnect
the aerial input (if external aerial) and remove the mains plug,
This is to prevent power surges
damaging the apparatus
Damage Requiring Service.
Should any of the following happen, disconnect from the mains supply and call an engineer or
Technical Help Centre. :-
Damage of the mains cord or plug.
Liquid or other objects enter the casing.
The apparatus has been exposed to rain or moisture.
If the appliance does not operate in accordance with the normal operation expected.
If the appliance has been dropped or the case damaged.
Содержание AMTDT3509-250
Страница 11: ...10 Connecting to a Surround Sound system ...