AKO AKO-575 Series, Руководство пользователя

Страница: 7 / 28

5750H002 Ed.03
7
Assembly
-Remove the bezels (1) from the unit.
-Loosen the screws (2) by turning them a 1/4 turn and open the cover (3).
-Drill the holes needed for the cable entry glands using the pre-stamped centres on the sides of the housing for
guidance. Fix the glands onto the device (4).
-Make the 2 holes in the wall using template included.
-Fix the unit to the wall using the screws and plugs supplied (5). If the wall is made of sheet metal (prefabricated
cold room stores), use only the screws provided without plugs.
-Insert the cables into the glands. Wire the unit following the diagram on page 8.
-Close the cover (3), insert and tighten the screws (2) and replace the bezels (1).
3
4
5
1
2
2
Ø Max. 20 mm 4