[AKD4637-B]
<KM120603>
2018/10
- 23 -
(2-1)
[Write]: Data Write Dialog
Select the [Write] button located on the right of the each corresponding address when changing two or more bits on
the same address simultaneously.
Click the [Write] button located on the right of the each corresponded address for a pop-up dialog box.
When the checkbox next to the bit name is checked, the data will become “1”. When the checkbox is not checked,
the data will become “0”.
Click [OK] to write the set values to the registers, or click [Cancel] to cancel this setting.
Figure 17. [Register Set] Window
(2-2)
[Read]: Data Read
Click the [Read] button located on the right of the each corresponding address to execute a register read.
The current register value will be displayed in the register window as well as in the upper right hand DEBUG
window.
Button Down indicates “1” and the bit name is shown in red (when read-only the name is shown in dark red).
Button Up indicates “0” and the bit name is shown in blue (when read-only the name is shown in gray).