Rev.010918-BR
2
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
Reorient or relocate the receiving antenna of the device which may be causing the
interference.
Increase the separation between the screen and the device’s receiver.
Connect the equipment into a different power outlet other than the device.
Pre-Installation
1.
Carefully unpack the screen.
2.
Always handle the screen in a leveled position on a clean surface.
3.
In order to protect the screen from exposure to stains, keep the screen out of contact with foreign
particles such as dust, sawdust, and/or liquids.
NOTE
Regardless of the mounting method, the screen should be securely supported so that the vibration or
pulling on the viewing surface will not cause the casing to become loose or fall. Included mounting screws
are complimentary and may not be appropriate for all mounting surfaces. Use appropriate anchors to safely
secure the screen to the mounting surface or consult with a professional installer.
Hardware and
Controls Accessories
List
Please make sure all parts listed below are included before proceeding with the installation.
A. M5x60 Screwx2
B.M12 Dry-wall anchor x2
C. Snap link x2
D. M6.5 eyebolt screw x2
E.
RF
Remote x1
F.Wireless 5-12v trigger cable
G. AAA batteriesx2
Installation Instructions
For installation assistance, please consult a professional Installer. AKIA Screens is not liable for faulty installations.
