AKG WMS40 FLEXX, Инструкция пользователя, Страница: 16 / 16

7.2 CK 55 L, C 555 L
CK 55 L C 555 L
Type Pre-polarized condenser microphone Pre-polarized condenser microphone
Polar pattern cardioid cardioid
Frequency range 80 Hz to 14 kHz 80 Hz to 20 kHz
Sensitivity 0.25 mV/Pa (-72 dBV re 1 V/Pa) 35 mV/Pa (-29 dBV re 1 V/Pa)
Electrical impedance at 1 kHz 1000 ohms 200 ohms
Supply voltage
1.5 to 10 V from AKG WMS bodypack transmitter B 29 L battery supply, MPA V L phantom power
adapter, AKG WMS bodypack transmitters
Cable length 1.6 m (5 ft. 4 in.) 1.5 m (5 ft.)
Connector 3-pin mini XLR 3-pin mini XLR
Finish matte black matte black
Size
8 dia. x 22 mm (0.3 x 0.9 in.)
length: 195 mm (7.7 in.),
max. diameter: 134 mm (5.3 in.)
Net weight
3 g (0.1 oz.) (w/o cable) 26 g (0.9 oz.)
7.1 WMS 40 FLEXX
HT 40 FLEXX PT 40 FLEXX SR 40 FLEXX
Carrier frequency range 660 to 865 MHz 660 to 865 MHz 660 to 865 MHz
Modulation FM FM FM
Audio bandwidth 65 to 20,000 Hz 35 to 20,000 Hz 35 to 20,000 Hz
Frequency stability
(-10°C to +50°C)
±15 kHz ±15 kHz ±15 kHz
Rated deviation 15 kHz 15 kHz 15 kHz
T.H.D. at 1 kHz typ. 0.8% typ. 0.8% typ. 0.8%
Compander Yes Yes Yes
Signal/noise ratio typ. 110 dB(A) typ. 110 dB(A) typ. 110 dB(A)
RF output 10 mW 10 mW -
Current consumption typ. 70 mA typ. 75 mA 115 mA/12 V
Power requirement 1 x 1.5 V AA size battery
(LR 6 to IEC 86-L)
1 x 1.5 V AA size battery
(LR 6 to IEC 86-L)
120/230 VAC
50/60 Hz
Battery life typ. 31 hours
(for 2200 mAh)
typ. 30 hours
(for 2200 mAh) -
Audio input level
for rated deviation
-
25 to 750 mV/1 kHz,
adjustable -
Input impedance - 1 Mohm -
Condenser mic power supply - 4 V/4.7 kohms (pin 3) -
Squelch threshold - - -100 dBm to -70 dBm, adjustable
Audio outputs
- -
bal. XLR and unbal. 1/4” jack: ad-
justable from mic to line level.
Output level at rated deviation: 500
mV rms
Size 229 x 53 x 53 mm
(9 x 2.1 x 2.1 in.)
60 x 74 x 30 mm
(2.4 x 2.9 x 1.2 in.)
200 x 190 x 44 mm
(7.8 x 7.4 x 1.7 in.)
Net weight 160 g (5.7 oz.) 60 g (2.1 oz.) 630 g (1.4 lbs.)
7 Specifications
35 WMS 40 FLEXX
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of Conformity, visit
http://www.akg.com or contact sales@akg.com.
BDA WMS 40 FLEXX 08_Hex:Layout 1 01/08/2008 15:52 Seite 35 (Schwarz/Black Auszug)