Tandem and multi-operator operation
15 (32)
Jupiter 800/900 8B, 9B RS & 10B
Document-ID: 948682-000 EN/SV
Version: B0
Author: SH
EN
TRANSMITTER & MAIN CONTACTOR OFF
Deselect the crane/cranes before the transmitter is turned off, otherwise the
transmitter remains to block the crane/s selection. Depress the STOP button
which switches off the transmitter. At the same time the main contactor in the
receiver is deactivated (the main contactor of the crane cuts out). The status
indicator light goes out. Operation can now, if desired, be performed with
another transmitter.
SELECT CRANE DURING OPERATION
1. Check that the crane/cranes are free to operate.
2.
Select crane/s. The first transmitter that make the selection can
operate the crane/s and the other transmitter will automatically be
blocked.
3. Push down the
button B9 (1
st
step).
10B/10BD
For 10B button B7
and B8 are used for crane selection. Selected crane is
indicated by the button LED. Press down the button for selection/deselection.
Selection 1
Selection 2
9B RS/9BD RS
For 9B RS the rotaryswitch is used for crane selection. Set the rotary switch
in desired position.
RS A (9BRS)
RS B (9B RS)
RS A+B (9B RS)