Tandem and multi-operator operation
14 (32)
Jupiter 800/900 8B, 9B RS & 10B
Document-ID: 948682-000 EN/SV
Version: B0
Author: SH
EN
TANDEM AND MULTI-OPERATOR OPERATION
TANDEM OPERATION
Tandem operation means that two cranes can be operated from the same trans-
mitter, which makes it easier, for example to lift two objects simultaneously
or a big object using two cranes. The function of the transmitter for tandem
operation is different from the standard.
MULTI-OPERATOR OPERATION
Multi-operator operation means that two transmitters can operate the same
object. This can be beneficial, for example, when the view is blocked. The
control of the object can be passed between two transmitters. Active crane
selection and deselection guarantees that only one transmitter is in control of
the object at a time. The function of the transmitter for multi-driver operation
is different from the standard.
START THE TRANSMITTER AND ACTIVATE THE MAIN CONTACTOR
The following procedure has to be followed when starting the transmitter:
1. Make sure no buttons are pressed.
2. Release the STOP button.
3. The status indicator should show slow blinking green.
4. Check that the crane/cranes are free to operate.
5.
Select crane/s. The first transmitter that make the selection can
operate the crane/s and the other transmitter will automatically be
blocked.
6. Activate the main contactor in the receiver by pushing down the
button B9 (1
st
step).
The unit is now in operating mode.