AKE Set 200, Инструкции по эксплуатации и монтажу, Страница: 28 / 32

28
ENGLISH
than one slave. With the new technology, license CSR® (Cambridge
Silicon Radio) it is now possible to connect one slave with more than one master.
Right now it it possible to pair max. two master devices with the
Headset.
This could be two mobile phones, one GPS and one mobile phone, or Intercom Set
201i and mobile phone/GPS. During a GPS announcement or a phone conversati-
on the intercom connection to the second helmet is blocked. After GPS or phone
call is finished, the intercom connection will automatically be re-established.
Multipoint
Multipoint
Some systems might still have problems with the Multipoint technology!
Refer to our FAQ’s or our customer hotline to find equipment where problems
are already known.
Please note:
Possible malfunctions and there cause
Important safety advices
CONNECT 10
Driver should not operate the device while driving!
Absolutely do not use a higher volume than necessary!
For frequent mobile phone users we recommend to use our fit-for-motorbike
hands-free kits
or one of our high-quality - motorbi-
ke communication systems, where amongst others the fit-for-motorbike hands-
free kits are integrated.
Call only with hands-free kit and use the automatic call acceptance of your
mobile phone if you want to answer calls while driving.
With a high volume your hearing can get damaged. Additionally, the driver’s
concentration on the traffic is not ensured any more!
PowerCom
It is a precondition, however, that the connected equipment are compatible with
Multipoint technology.
Interferences and interruptions
Start-up signal can be heard but device is not starting
Volume is too low:
Inexplicable malfunctions
: Radio waves of the Bluetooth frequency (2,4 GHz)
are sometimes highly reflected by buildings and this might lead to a fluctuation of
field intensity. Interferences or interruptions might be possible.
: Bluetooth helmet set is on
standby, please press multifunctional button once.
Check microphone and loudspeaker assembly (correct
position).
: Reset system, shortly interrupt the connection to the
battery and restart the Bluetooth helmet set.