AKE Set 200, Инструкции по эксплуатации и монтажу, Страница: 26 / 32

26
ENGLISH
the Bluetooth helmet set and ask your partner to test the voice quality on a landline
phone. For further information please refer to the manual of the navigation system.
Adjust your mobile phone in such a way that the ring tone in the
helmet is heard. For the ring melodie
Bluetooth helmet set and on the
mobile
Operating functions when using a mobile phone
Calling tone:
Talking directly from helmet to helmet (intercom)
Stealth Bluetooth Helmet Set 201 and a Stealth Bluetooth Helmet
Set 201i (Intercom set).
automatic call acceptance should not
adjust to shortly, the start of signal will be lost when audio is in stand by mode.
: Press one time short the multifunction key. At many mobile
phones it is possible to activate the automatic call acceptance. This would
reduce the handling to a minimum.
Press the multifunctional key
shortly twice to reject a incoming phone call.
: Short klick at the multifunctional key or just wait until your
calling partner hangs up, the connection will automatically end.
: If you make phone calls, you have to enter the phone num-
ber at your mobile phone.
: If you like to redial the last number, please press the multifunctio-
nal key shortly twice.
: Press the multifunctional
button approx. 4 sec. to start the voice dialling.
: The volume can be changed on the
. When reaching the maximum or minimum volume it will be indicated with
an adequate acoustic signal.
:
.
For the multifunctional key optionally, an external button can be used. Please
refer to the section “Important safety advices” below.
Accept phone calls
Reject incoming phone calls with double klick:
End phone calls
Making phone calls
Redialling
Voice dialling (not at all mobile phones available)
Volume
Autoconnect
Double click on
multifunction button switches between the partners back and forth.
For this you need a
Switching a call from phone to the Bluetooth helmet set and vice versa
To switch an active call between your phone and Bluetooth helmet set, refer to
mobile phone menu or press the multifunctional button one time.
Not all mobile phone automatically get connected with the Bluetooth
hel-met set when being turned on. The connection can be made through the
mobile phone
Call Back by multipoint operation with intercom and phone :
As the systems used are with low radiation they cause no