AKE Set 200, Инструкции по эксплуатации и монтажу, Страница: 27 / 32

27
health hazards. Nevertheless they provide a range of up to 250 m (free field).
Therefore it is possible to get a communication from bike to bike.
Stealth Bluetooth Helmet Set 201i
Stealth Intercom Set 200
with helmet microphone, P/N: 31362.
Also available as complete set: , P/N: 31363.
If you are looking for a more mobile solution like a “small” Bluetooth communicati-
on system,
Comfort Entertainment when using a Motorbike Communication System
Enjoy the comfort of our
and still use your Bluetooth helmet set. The
can be used at all motorbike communication systems that are
equipped with an Bluetooth-interface, how e.g. the AKE Bluetooth helmet connec-
tor. Of course, you will still experience the full comfort of a PowerCom system, e.g.
GALA (noise dependent volume adjustment), priority management, microphone
activation when needed, etc.
we recommend our pocket repeater
For more details please refer to the description of the pocket repeater. Available as
complete set
, P/N: 39401.
To pair the second device please turn off the already paired device. After a success-
ful pairing please switch on all devices, the intercom should automatically get
connected.
The can be paired with two Bluetooth devices with
different profiles and makes it possible to listen to music in stereo and to automati-
cally switch to a mobile phone or to a navigation system.
high quality PowerCom Motorbike Communi-
cation Systems Stealth Bluetooth
Helmet Set 201
Stealth Bluetooth Helmet Set 201
BlueCom for 2
Considerations for pairing with multiple devices
Using with multiple devices in Multipoint mode
Some mobile phones / GPS might act stubborn when using multiple devices or
after pairing they do not connect properly. In such cases it was proven and tested
to delete the pairings at all devices, then turn off devices and afterwards pair
them again. With Intercom Set please mind the order of pairing:
Bluetooth Helmet Set: To delete all pairings double klick the multifunction button
in pairing mode (201i: push +/- button together). A dual tone indicates that all
entries are now deleted.
all
Always pair Intercom Set first!
.
So far when using Bluetooth it was only possible to connect master with more one
. BlueCom 102
The new firmware now supports also the automatic switching between Intercom
and GPS or mobile phone with Multipoint technology
ENGLISH