AKE ECC basic, Руководство пользователя, Страница: 9 / 20

9
After successful pairing, the alternating flashing is ended. Now switch off your ECC unit.
The next time you switch on all paired devices are automatically connected. Note that the
phone must be set to "auto-connect".
Do not pair the same phone with two ECC systems in the team,
otherwise operating problems are possible!
Use with smartphone, etc.
Display:
•
Call active
••
Stereo active
•••
Mobile stand by
Accept phone calls
Shortly press the multifunction button

once. At many mobile phones it is possible to
activate the automatic call acceptance. This would reduce the handling to a minimum.
Reject incoming phone calls
During an incoming call, briefly press the multifunction button

1 sec. to reject the call.
End phone calls
Shortly press at the multifunction button

or just wait until your calling partner hangs up,
the connection will automatically end.
Making phone calls
If you wish to make phone calls, you have to enter the phone number at your mobile
phone or use redialing.
Audio-Player
The use of an audio player (or equivalent device for entertainment purposes) is not
permitted for devices that transmit safety-related communication.
Adjust the volume
The volume can be adjusted separately for each operating mode both on the ECC
system and on the mobile phone. When the highest or lowest volume is reached, a
corresponding beep sounds.
Connect devices automatically
Not all mobile phones automatically connect, when they are switched on, the connection
can then be activated via the mobile phone menu. If the mobile phone is already
switched on, the Bluetooth electronics of the ECC system tries to establish the connection
automatically when switching on. Some cell phones then require a confirmation.
Voice control (not available on all mobile phones)
Press the multifunction button

for about 1 second to start the voice control. For many
devices, you will now have to wait for the ready tone next to the confirmation tone, then clearly
state the required command (see the operating instructions for the connected device).
Other, every 30 sec. 2 short low tones: connection to the mobile phone interrupted.
Do not use these functions to switch off the microphone!
Instead, press Plus & Minus together 1 x briefly.
PETeam hands-free operation in combination with a smartphone, etc.
During the music operation or during a telephone conversation, the speech connection to
other team members is blocked. In case of a request from the team, the voice connection
will be automatically restored in the case of music operation; a call waiting tone will be
!
!