
5
Important!
Before you start using the
ECC
hands-free system, please read these lines
carefully and follow the respective safety instructions!
Application examples
The ECC hands-free system offers a full duplex multi-user communication system
integrated in ear protection capsules, developed by AKE.
The ECC hands-free system allows up to eight participants to be paired per team. At the
same time, four participants can talk and hear (full-duplex) without any operation.
ECC silence also supports swap operation for all paired participants, see page 8 for details.
The main field of application of the ECC hands-free system is especially for difficult work
in the team and in the field of view of the participants.
An observer outside the danger zone can warn the endangered person at any time - even
if that person is currently speaking! The hands remain free to hold on, for example in case
of danger of falling. Thus, help can be called in immediately in extreme danger situations.
An integrated Bluetooth
®
interface enables the wireless connection of the following
Bluetooth
®
devices (combination A, B or C):
A Mobile phone
B Two-way-radio
C Smartphone
Commissioning of the full-duplex team hands free connection
The ECC hands-free systems (Easy Connect Communication) developed by AKE are
extremely easy to connect wirelessly. Once paired devices connect automatically. Please
pair new devices once as follows:
In two easy steps to the destination:
(For more than 4 team members, see details on page 8.)
1.
Turn on all the devices of a team in a timely manner by briefly pressing the multifunction
button
for all of them - indicated by a fast alternating flashing (red / blue). [
•
•
]
2.
Make one device to a team leader system, by briefly pressing the plus button
once
− Displayed by slow alternating flashing (red / blue).
[
•
•
]
The connection will now be made automatically within 30 seconds. A short beep (low /
high) indicates that the respective speech connection is active. The selected team
composition is saved automatically. Repeat this procedure if not all devices are connected.
To switch off, press and hold the multifunction button
until the "Power off" announcement.
From now on you only need to switch on the devices for hands-free operation
(with automatic conference hands-free operation for three or more devices)
If desired, the speech connection can be switched to standby and also activated again
by briefly pressing the multifunction button
once in each case.
Display:
Device when
pairing
•
•
Member is
paired
•
Team leader is
searching
−
•
Connection
active
•••
Connection
stand by
•
On request, individual settings can be made, see section: "System settings".
Содержание ECC basic
Страница 19: ...19 Notes...
Страница 20: ...20 10 20 4 39 4...