SPX+ Introduction Manual - updated until firmware 4997
- 8 -
SPX+ Modules
The below modules can be added to the standard configurations to build up the device with what you
need. For example, if you wish to have 12 sensor ports, you can order an SPX8 and an additional
sensor4 module. You can also build your unit using our online Configuration Tool
(
https://www.akcp.com/configuratorTool/index.html
) to check that it fits in 1U or 0U rack mounting. If you
exceed 1U then there is the option to continue the configuration on an additional U connected via
BEB to the base unit.
sensor4 (S)
Additional sensor ports can be added to the base SPX+ module in blocks of 4. The sensor4 modules
are compatible with all AKCP intelligent sensors. Build a cost effective monitoring platform, able to
monitor multiple cabinets from a single IP address.
dry10/20
Use Dry Contacts for monitoring a variety of third party devices, door contact sensors, digital outputs
from UPS, control panels and alarm panels. Use IO Dry Contacts to actuate responses to inputs.
The 10x or 20x Dry Contacts module is available in 3 configurations:
Configurable I/O dry Contact (0VDC/5VDC)
Input only 5V Dry Contact, opto-coupled input
Isolated input Dry Contact, from 5V to 20V voltage input signal
Cellular Modem and Optional GPS
The cellular data modem module gives the SPX+ ability to communicate over a cellular data network.
An external antenna ensures a good signal can be received even if the SPX+ is inside a cabinet.
Send SMS alerts directly from the SPX+ device, or connect it to our central monitoring platform,
AKCPro Server, via a VPN connection. Cellular modems are available in European and US bands,
and in 3G or 4G versions. Optional GPS antenna can be added for geolocation of the device.
