AkcesMED PARAMOBIL, Руководство пользователя

Страница: 14 / 32

Hip clamping-ring – perpendicular and
horizontal regulating
Hip clamping-ring should be fixed at the
level of trochanter of lower limbs (to
regulate perpendicularly use knobs B).
After fixing height you must regulate
position of hip clamping-ring to the hips
using knobs C (regulation forward and backward) and then the knobs D (hips
regulation –picture 3). The proper position of trunk and pelvis depends on
precise adjusting. The ideal position is one line of arms, trunk and hips.
Verticalize patient, fasten both fasteners of hip and chest clamping-ring (double
protective system – upper and lower blockades). Then adjust the knee pelot-
pads to user's knees (vertical and horizontal regulation) by unfastening the snap
fasteners, shifting pelot-pads and fastening the snap fasteners. Finally button
up VELCRO stickers (picture 2 and 3).
During coming into standing frame or getting out of it you mustn't rest
on rear clamping-rings' locks while they are being opened.
The attempts of overloading the opened locks of clamping-ring can
cause a fall of device or deformation, which results in incorrect
functioning of fastener lock.
After blocking of feet and knees adjust the location of hip and chest
clamping-ring.
Please pay attention during clamp fastening. Characteristic sound “click” should
be heard. It inform you that the clamp was fasten correctly.
Chest clamping-ring – perpendicular
regulating
Chest clamping-ring should be installed in
such position, which enables patient to
rest safely on pelot-pads. To regulate
height of chest clamping-ring use knobs
(A) (pic. 3
)
D
C
A
B
A
foto 3
pic.3
14
:
www.akces-med.com
'
+48 17 864 04 70
*
export@akces-med.com
PARAMOBIL