AkcesMED PARAMOBIL, Руководство пользователя

Страница: 26 / 32

24
:
www.akces-med.com
'
+48 17 864 04 70
*
export@akces-med.com
24
:
www.akces-med.com
'
+48 17 864 04 70
*
export@akces-med.com
24
:
www.akces-med.com
'
+48 17 864 04 70
*
export@akces-med.com
26
PARAMOBIL
MAINTENANCE AND CLEANING
10
Recommendations for cleaning the upholstery and other elements of the device:
The standing frame ™, which is a medical device, should always be kept PARAMOBIL
clean and should be used in accordance with the manufacturer's instructions. The
standing frame should be kept in a clean, dry and ventilated room. Maintenance and
cleaning must be done at least once a month. Periodic cleaning and maintenance of the
device is essential to keep its proper functioning and safety.
9. Do not clean, replace any elements or maintain the standing frame during use.
3 . Remember to remove excess moisture from the upholstery before the next
cleaning.
1. Wash with warm water using a soft cloth and mild cleaners.
5 . You must not soak the upholstery. !
2. Make sure the cloth is not too wet, as this may enlarge the stain and damage
the upholstery or foam inside the upholstery.
7. Do not use hard brushes for cleaning the upholstery.
8. Do not clean the upholstery with strong chemicals, e.g. solvents or chlorine-based
caustics.
4 . The upholstery must not get wet during cleaning.
6. After cleaning the stains, the upholstery should be rinsed with lukewarm water and
dried with a clean cloth.
10. Metal and plastic elements should be cleaned by hand with suitable cleaners, after
having read the recommendations of the manufacturer of the given cleaner
11. It is possible to disinfect metal, plastic, wooden and upholstery elements of
the product with a generally available disinfectant. In order to disinfect the selected
element, spray its surface with a disinfectant generally available on the market and
wipe with a dry, clean cloth. After disinfection, wait until the element is completely
dry, especially in the case of upholstery. Before using the disinfectant, first check in
an invisible place whether the product will not discolor or damage the disinfected
surface.