SAVE
Page 204
S3000XL Operator’s Manual
SAVE MODE
Once you have some sounds in memory that you have edited, you will no doubt want to
save them for future retrieval. Pressing SAVE gives this screen:
SELECTING FLOPPY OR HARD DISK
If the cursor is not already on the field, move the cursor to the
field and
select
or
as appropriate using the DATA wheel.
SELECTING THE HARD DISK PARTITION
When a hard disk is formatted on the S3000XL, it is divided into sections called partitions
(see later for details on formatting disks). This makes disk management slightly easier.
Depending on the number of partitions on your disk, the partition is shown as a number A
- ? next to the HARD-: field. You can move the cursor one position to the right to select
the partition you wish to save to. You will see something like this screen:
Use the DATA wheel to make your selection.
SELECTING THE HARD DISK VOLUME
As well as being divided into partitions, each partition is divided into volumes. The volume
is selected in the
field (in the above example, it shows that the volume is not named
- see below for details on naming volumes). To select the volume, move the cursor to the
field and select using the DATA wheel.
SELECTING THE TYPE OF SAVE
The
field allows you to select what it is you will save to disk (be it floppy
or hard disk). To change the type of save you wish to perform, move the cursor to the
field:
The options are:
ENTIRE VOLUME
This will save the entire contents of the memory to disk.
This will include all programs, samples, the multi and
