
EN - 8
1. Insert the main plug into a main supply power outlet.
2. Select the FUNCTION switch to RADIO position and and then the POWER indicator will light up.
3. Slide the BAND switch to select AM / FM band.
4. Rotate the TUNING control knob to search for the desire station.
5. Rotate the VOLUME control knob to the desire volume sound.
6. To power off the unit, select the FUNCTION switch to OFF position.
NOTE:
To have the best AM reception, slightly rotate the unit or move the unit to a different area of the room until the
best reception is obtained.
To obtain the best FM reception, fully extend the FM antenna. Avoid close proximity to the speakers and other
electrical appliance.
RADIO OPERATION
1. Insert the main plug into a main supply power outlet.
2. To open the CD door by lifting the Open/Close area near the CD door. Insert disc into the disc
compartment with the title side upwards.
3. Close the CD door, select the FUNCTION switch to CD position, and turn on your unit, “--” is displayed for
few seconds and total number of tracks will be shown on the LED Display.
4. Press the PLAY/PAUSE button to play the CD.
5. Press SKIP / buttons to jump to next or previous track.
6. Press and hold SKIP / buttons to search rapidly within a track to locate a specific passage.
7. During CD play, press the PLAY/PAUSE button to pause CD playing and press again to resume.
8. Press the STOP button to stop the CD playing.
9. After all tracks have been played; the CD player will stop automatically.
10. To power off the unit, select the FUNCTION switch to OFF position.
NOTE:
Do not open the CD compartment while the disc is playing or rotating. Press the STOP button first.
CD OPERATION
To repeat one track / all tracks on music CD disc
1. During CD disc playback, press SKIP / buttons to select a track you wish to repeat.
2. Press REPEAT button once and REPEAT indicator will be flashing. The unit will play the
desired track repeatedly.
3. To repeat the whole CD, press the REPEAT button twice and the REPEAT indicator will light up.
4. To cancel the setting, press the REPEAT button repeatedly until the REPEAT indicator turns off.
REPETITION FUNCTION
The unit is designed to play normal music CD disc bearing the correct identication logo. If the disc does not confirm to the
standard, it may not be played back properly.
Caution:
• Playback of CD-R may depend on recording conditions.
• Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R disc. It may
cause malfunction.
• Do not load a blank CD-R disc. It will take over 1 minute to read the disc. The disc may be damaged if you
try to open the CD Door while reading the disc.
• CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible to be read.