Akai ACI-7T, Инструкция по эксплуатации, Страница: 29 / 53

11
RADIO OPERATION
Tune in to a radio station
1. Press the STANDBY button to turn on the ACI-7T .
2. Press the MODE button repeatedly until a radio frequency is shown on the LCD Display.
3. Press and hold either the « » or « » buttons to search for a station.
4. To tune in to a station briefly press either the « » or « » buttons.
DON’T FORGET! You may need to reposition the ACI-7T to get the best reception.
Make sure that you have fully extended the FM antenna wire.
Storing a radio station by using the remote control
1 . Tune to a radio station as described above.
2 . Press the MEM button. “P” and a number will be shown on the LCD Display.
3 . Press the

or

buttons to select the number you want to assign to the radio station.
4 . Press the MEM button again to store the station.
5. Repeat this procedure to store other radio stations.

DON’T FORGET! You can store a maximum of 20 stations.
Moving a stored radio station to a new preset position
1. Tune to a radio station as described above.
2. Press the
MEM button on the remote control once to show current preset.
3. Press the

or

buttons on the remote control to select the new preset number.
4. Press the MEM button to store the radio station in the new preset.
DON’T FORGET! This will overwrite any previous stored station on the selected preset
Listening to a stored station
1. Store a radio station as described previously.
2. Press the

or

buttons to cycle through the stored stations.