Akai ACI-7T, Инструкция по эксплуатации, Страница: 28 / 53

10
Setting the alarm
1. Make sure the ACI-7T is powered on before setting the alarm.
2. Press and hold the ALARM/SET button which is located on the backside of the unit. An alarm
clock icon and the alarm time“00 ： 00” appear on the LCD display.
3. Press the «-» or «+» buttons to change the minutes.
4. Press the « » or « » buttons to change the hour.
5. Once the alarm setting has been confirmed, press the
ALARM button, or wait for a few
seconds and the ACI-7T will return to the previous mode.
6. Press briefly the ALARM button on the unit or on remote control button to turn the alarm
mode on or off.
DON’T FORGET!
The alarm will wake you up with the sound of the last mode selected; You can select the wake-up
type by pressing the WAKE-TO button.
There are 3 types :“IPOD”,“RADIO”,“BUZZER”, the icon referring to your selection will appear
on the display as:
DON’T FORGET! Press on "ALARM VOL" on the back of the unit or button on remote
control to increase or decrease the volume of alarm.
There are 3 grades for selecting; the indicator is in the top right corner of display as:
Snooze mode
1. When the alarm sounds, you can press SNOOZE or MUTE buttons (except the POWER button)
to activate the SNOOZE function.
2. After approximately 10 minutes the alarm will sound again. You can activate the SNOOZE
function again or press the POWER button to cancel the snooze function.
DON’T FORGET! Snooze function will turn off the ACI-7T . If you want to turn on the ACI-7T ,
press the POWER button to cancel the snooze at first and press POWER again to turn it on.
Sleep mode
The ACI-7T can be programmed to switch off after a set time, from increments of 10 minutes, up
to 90 minutes. Press the SLEEP button until the required minutes are shown.