Akai ACI-7T, Инструкция по эксплуатации, Страница: 26 / 53

8
DESCRIPTION OF REMOTE CONTROL
1- MENU button
2- STANDBY button
3- MUTE button
4- MEMORY button
-To store the radio stations-
5- MODE button
6- UP ARROW

button
7- VOLUME DOWN button
8- VOLUME UP button
9- OK button- To confirm selection-
10- SLEEP button
11- DIMMER button
12- DOWN ARROW

button
13- REWIND button
14- FORWARD button
15- PLAY-PAUSE button
16- ALARM button
17- WAKE TO button
18- ALARM/VOL button
Using the Remote Control
The CR2025 lithium battery is already installed in the remote control. Pull out the small mylar
insulation tab as shown in the illustration to begin using the remote control.
To use the remote controller, point the remote control transmitter on the front panel of the main
unit and press the desired button. Please note that bright sunlight or artificial light may interfere
with the proper operation of the remote control.
Battery Replacement
When the remote operation becomes weak or intermittent, it is time to replace the remote control
battery. Pull out the battery holder, remove the old battery and install a new CR2025 battery in
the holder as shown in the illustration. Slide the holder back into the remote control.
NOTE: If the battery is installed incorrectly the remote control will not work.