15
LISTENING TO THE RADIO
Auto. Tuning
1. Select
TUNER (Front Panel label 6) as the source.
2. Press
BAND (Remote label 7) to choose AM/FM band frequency.
3. Press AUTO/MANUAL (Front Panel 24) or AUTO (Remote label 10) to select to have auto tuning or not.
4. For auto tuning, press UP/DOWN (Front Panel label 17 and 21) or (Remote label 14 and 16) to search
for your desired stations automatically.
(To operate manual search, press the UP/DOWN buttons the same and searches your favorite station.)
PRESET MEMORY
1.
To store your selected stations, press MEMORY (Front Panel 19) or (Remote label 4) and
M in red
color will appear on the display.
2.
Press UP/DOWN (Front Panel 17 and 21) or (Remote label 8 and 9) to choose the station number for
your desired station frequency. The green musical calendar number
1 ,
2 ,
3
...
on top of the
display is to show the station number.
3.
Press MEMORY again to confirm.
4.
You can store up to 15 stations for AM and FM band.
RECALLING PRESET STATION
1. Choose
TUNER (Front panel 6) or (Remote label 23) as the source.
2. Press BAND (Remote label 7) to select A
M or FM frequency.
3. Press STATION UP/DOWN (Remote label5 and 6) or press STATION (Front panel 23) then UP/DOWN
(front Panel 17 and 21) to go to your preset stations.
AUTO PRESET SEARCH (APS)
It is to allocate and memory radio station automatically. It will search the station with RDS broadcast first and
then search the other without.
1. Press
APS (Remote label 3) to activate this function.
2. Then you will see SEARCH then the band frequency. The station found will be stored.
RDS DISPLAY (c/w RDS)
RDS is a method for the transmission for additional information via VHF stations. For example, name of the
station broadcasting will be shown on the multifunction display.
It can only function if the local broadcasting stations have the RDS transmission and the signal is strong
enough.
1. Press
the DISPLAY (Front Panel 20) repeatedly to have PS (program name), WAIT CT.
2. The selected display mode will be flashing for 5 times until it searches your desired type.
3. NO PS, NO CT will appear after the flashing to show that function cannot be carried out. (E.g. due to
weak signal.)
