Version 3.11 Addendum
Page 15
9) Press the STORE/ENT key to continue, or the ESCAPE key to abort.
The display will show the following ERASING message while the current operating
system is erased from the DR16pro’s Flash ROM:
After a few seconds, the display will change to show a progress display as the new
operating system file is programmed into the DR16pro’s Flash ROM:
The count will increment slowly from 0 to 100 as the new operating system is being
programmed.
WARNING!
Do not switch off the DR16pro while the Flash ROM is being erased or
programmed.
If you do, the DR16pro may not reboot when next powered up.
10) Confirm the Checksum.
When the new operating system has been programmed into Flash ROM, a display
similar to the following will be shown:
This display shows a hexadecimal checksum of the Flash ROM’s contents (DB38 in
the example above) which should match the checksum distributed with the operating
system file.
11) Switch the DR16pro off and on again to reboot with the new operating system.
