Ajax TOCCO Toccotron AC, Руководство пользователя

Страница: 29 / 52

OM-229 158 Page 25
6-5-1. Time Based Control
Mode...: Timed Segment KWS:
Program: 1 Segment: 1 0 x1
Type...: End
Power..: 0.0 KW SegmentTime: 00:00:00
Mode displays the control mode. Also displayed are the present program number, program segment, KW seconds, Segment type, current power
level and elapsed time of the current segment.
6-5-2. Remote Control
Mode.....: Remote
Power....: 0.0 KW
CycleTime: 00:00:00
Status...: Stopped
During active operation, Power shows the actual power delivered from the power source, Cycle Time shows the elapsed time of the heating cycle,
and Status indicates if the system is running or stopped. This screen is for monitoring purposes only.
No changes can be made to the run status screen, and the Cursor, Increase and Decrease buttons are not functional.
6-5-3. Manual Control
Mode.....: Manual
Power....: 0.0 KW
CycleTime: 00:00:00
Status...: Stopped
During active operation, Power shows the actual power delivered from the power source, Cycle Time shows the elapsed time in the heating cycle,
and Status indicates if the system is running or stopped. This screen is for monitoring purposes only.
No changes can be made to the run status screen, and the Cursor, Increase and Decrease buttons are not functional.
6-6. Parameters
During active operation, the Parameters screen allows the operator to monitor the power source output operating parameters. These parameters in-
clude output power, output amperage, output voltage, and output frequency. The Parameters screen is for monitoring purposes only and has no
selectable or changeable parameters. Once the cycle has ended or the Stop button has been pressed, the Power, Voltage, and Current values return to
zero (0). To review the latest run parameter, press and hold the Parameters button.