The Ajax security system allows conducting tests for checking the functionality of
connected devices.
The tests do not start immediately but within a period of 36 seconds when using
default settings. The test time start depends on the settings of the detector ping
interval (the Jeweller menu in the hub settings).
Installation of the Device
Regardless of the type of electrical circuit, only a qualified electrician should install Relay.
The communication range with the hub in the line of sight is up to 1,000 meters.
Take this into account when choosing the location for Relay.
If the device has a low or unstable signal strength, use the
Installation process:
When installing Relay in the box, lead out the antenna and place it under the plastic
frame of the socket. The bigger the distance between the antenna and metal
structures, the lower the risk of interfering (and impairment) of the radio signal.
Do not shorten the antenna! Its length is optimal for operation within the used radio
frequency range!
1. De-energize the cable to which Relay will be connected.
2. Connect the grid wire to the Relay terminals according to the following scheme:
