For detection and pairing to occur, the device should be located in the coverage
area of the hub’s wireless network (at the same object). The connection request is
transmitted only at the moment of switching on the device.
If the device failed to pair, wait 30 seconds and then retry. Relay will appear in the
list of hub devices.
The device statuses update depends on the ping interval set in the hub settings.
The default value is 36 seconds.
When switching on for the first time, Relay contacts are open! When deleting Relay from the
system, contacts open!
States
Parameter
Value
Jeweller Signal Strength
Signal strength between the hub and Relay
3. Click Add — the countdown will begin.
4. Press the functional button.
1. Devices
2. Relay
