Alarm LED indication
Allows you to disable the
fl
ashing of the LED
indicator during an alarm. Available for devices
with
fi
rmware version 5.55.0.0 or higher
Primary Detector
If setting is active, the DoorProtect Plus primary
detector reacts to opening/closing
External Contact
If setting is active, the detector registers
external detector alarms
Shock Sensor
If active, shock-sensor will detect alarm after
more than one impact
Sensitivity
Sensitivity level of the shock sensor
Ignore Simple Impact
If active, the detector ignores single hit
Tilt Sensor
If active, sensor will detect tilt
Tilt
Selecting the normal angle of the sensor. Above
this limit, the sensor detects an alarm
Tilt Alarm Delay
The number of seconds from the moment the
sensor is tilted to the alarm
Always Active
When turned on, the detector is always armed
External Contact Enabled
Selecting the type of
Time before alarm, sec
(available for roller shutter motion detector only)
The time in seconds during which a given
number of impulses should be counted. This
time is counted after the
fi
rst impulse of the
detector.
Impulses before alarm
(available for roller shutter motion detector only)
Number of detector impulses required to raise
an alarm
Alert with a siren if opening detected
If active,
added to the system
are
activated
when opening detected
Alert with a siren if an external contact is
opened
If active,
added to the system
are
