If the connected wired detector is triggered, you receive the noti
fi
cation.
To make sure the alarm is raised when the roller shutter is opened, connect the
wired roller shutter motion detector with the NC (normally closed) contact to
DoorProtect Plus. The function is available for the devices with
fi
rmware version
5.53.1.0 and higher.
Before installing the detector, make sure that you have selected the optimal
location that follows the guidelines of this manual!
1.
Fix the SmartBracket attachment panel using bundled screws. If you use any
other attachment tools, make sure that they do not damage or deform the
attachment panel.
Use double-side adhesive tape only for temporary attachment of the detector. The
tape runs dry with time, which can cause falling, false triggering, and detector
malfunction.
2.
Put the detector on the attachment panel. When the detector is
fi
xed in
SmartBracket, it blinks with LED, signaling that the tamper is closed. If LED
