AJA R20CE, Руководство пользователя

Страница: 5 / 12

1
5
AJA R20CE 10-bit Encoder User Manual — User Controls
User Controls
The user interface for the R20CE includes a 16 position hex
rotary switch, a momentary action up/down toggle switch, and 6
LEDs. Use the rotary switch to select a function and then adjust
the function using the toggle switch. The BANK Led allows two
banks of functions to be accessed, The LEDs are numbered 1-6
from top to bottom. The LEDs are labeled as follows:
Control Functions
The following tables describe the functions controlled by the rotary switch and toggle switch
user interface. To access a particular function, set the hex rotary switch to the appropriate
function, and then adjust the function by flipping the toggle switch. For ON/OFF-type
functions, such as Setup/NoSetup selection, moving the toggle switch to the UP/LEFT
position sets the function and moving the switch DOWN/RIGHT clears the function. Using
the toggle with multi-value functions, such as INPUT MODE, rotates through all the
possible choices for the function. To control variables, such as framesync delay, the value of
the function will be incremented or decremented each time the switch is momentarily moved
either up, or down respectively. Holding the switch in either position will cause the function
to automatically begin incrementing or decrementing—after a two second pause. On
functions having more than two selections, using the toggle switch cycles through the
available selections.
LED FUNCTION
1 BANK (OFF=Bank O
ON=Bank 1)
2 525
3 AUTO (auto 525/625 select)
4 625
5 VID (video detected at input)
6 CONFIRM (for signaling memory
load, errors, etc.)
Rotary
Switch
LEDs
Bank
Switch