OG-FiDO-12G-Series openGear Card v3.2.1 10 www.aja.com
Card Alarm State – Yellow
SDI Signal Present, Fiber Signal Not Present
The screen capture below shows an example in which there is an SDI signal
present and locked, but there is no Fiber signal present. In that case, the
DashBoard Control System shows a yellow Card State with the message "Signal
Status No Signal."
Additionally, under the Signal Status tab, the SDI IN Signal Status is shown as
"Signal Present," and the Input Lock is shown as "Locked," while the FIBER IN
Signal Status displays "No Signal," and the Input Lock displays "No Lock."
Figure 4. SDI Input Signal present and locked, Fiber Input Signal not present
NOTE: The description above for one SDI input and one fiber input applies only to the TR
model. The other cards in this series are very similar in their behavior with respect
to signal status indicators.
