www.aja.com
95
FS4 Frame Synchronizer/Converter v1.1
The Status screen displays overall FS4 operational status. You can right-click most video
values to change them, allowing you to edit many parameters in one place. Parameters
with format incompatibilities or other alarms are highlighted in red.
Figure 37. Status Screen, Single Channel Mode
Video 1-4
INPUT
OUTPUT
Caption Translator
Freeze Output
Proc Amp
Color Corrector
UFC Custom
Background
Shows the input source and format.
Shows the output video selection and format.
Shows the caption selection and caption signal presence.
Shows whether Freeze Output is On or Off.
Shows whether the Proc Amp is On or Off.
Shows whether the Color Corrector (RGB) is On or Off.
Shows whether Custom conversion, AFD, and ROI are On or Off.
Shows the current background signal (Black or Matte).
Genlock
Genlock Source Shows the source of the genlock reference, and its format.
Video Input Status
SDI 1 - 8 Shows the status of each Video input (BNCs and SFPs).
Audio Output
Global Audio Output Right-clicking on the Global Audio Out parameter value lets you
select a global output. That same audio will be sent to all the
FS4 audio outputs. When set to Off, the other Audio Outputs
display their selected value, otherwise only the Global Audio
Output setting is displayed.
AES
MADI BNC
MADI Fiber
Vid1-4 Embed
Each of these settings, when visible, reports the audio that is
currently being routed to that audio output. Mute and Sig Gen
is reported when all of that port’s outputs have that setting.
Map is reported when the port’s outputs are mapped.