AJA Video Systems Inc IPR-10G-HDMI, Инструкция по установке и эксплуатации

Страница: 43 / 67

10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.1 43 www.aja.com
Figure 33. IPR-10G2-HDMI Network Configuration Media 2 Tab
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
JG­IPR­10G2­HDMI
Factory Reset
Factory Settings ­­ Reset ­­ ­­ ­­
Preset #1
My PC Kona Manual Save Recall Export Import Erase
Preset #2
Wills Kona ­manual Save Recall Export Import Erase
Preset #3
Will Kona SDP 4­1a1 Save Recall Export Import Erase
Preset #4
Wills Kona manual with
source IPs
Save Recall Export Import Erase
Preset #5
My PC Kona 3­4 SDP Save Recall Export Import Erase
Preset #6
Will Kona 4­2a1 SDP Save Recall Export Import Erase
Preset #7
Preset 7 Save Recall Export Import Erase
Preset #8
Preset 8 Save Recall Export Import Erase
Preset #9 Preset 9 Save Recall Export Import Erase
Preset #10 Preset 10 Save Recall Export Import Erase
Preset #11 Preset 11 Save Recall Export Import Erase
Preset #12 Preset 12 Save Recall Export Import Erase
Preset #13
Preset 13 Save Recall Export Import Erase
Preset #14
Preset 14 Save Recall Export Import Erase
Preset #15
Preset 15 Save Recall Export Import Erase
Preset #16
Preset 16 Save Recall Export Import Erase
Preset #17
Preset 17 Save Recall Export Import Erase
Preset #18
Preset 18 Save Recall Export Import Erase
Preset #19
Preset 19 Save Recall Export Import Erase
Preset #20
Preset 20 Save Recall Export Import Erase
Presets #1­
20
All ­­ ­­ Export Import Erase
Connection
Serial Number
ENG003
Software Version
2.1.0.15d
Connection Status
Connected
Network
CY­ IPT­10G2­SDI
CY­IPR10G2­HDMI
CY­IPR10G2­SDI
CY­IPT­10G2­HDMI
GC­IPR10G2SDI
GC­IPT­10G2­SDI­E…
IPR­10G­1PR030114
IPR­10G­1PR030310
IPR­10G­ENG010
IPT­10G2­SDI­ENG…
IPT­10G2­SDI­ENG…
JG­IPR­10G2­HDMI
SL­IPT­10G2­SDI
Network Configuration
IP Address Type
Static
IP Address 172.16.188.114
Netmask
255.255.0.0
Default Gateway 172.16.0.1
Primary DNS Server
Secondary DNS Server
DNS Search Path
Apply
MAC Address
00:0C:17:88:1D:0E
Link State 10000MBit Full­Duplex
Control Media1 Media2
The Network screen allows you to view and change your IP Mini-Converter's
network settings. Click Apply to activate any changes.
IP Address Type - IP Address Type determines the type of TCP/IP network
configuration to be used. DHCP enables connecting to the network DHCP
server, which assigns the IP Address, Netmask, and Gateway automatically.
Static lets you set these parameters manually.
NOTE: If the IP Address Type is DHCP, the IP Address, Netmask, and Default Gateway
are gray, indicating they are set automatically and cannot be changed unless
IP Address Type is first set to Static. Changes are saved and activated upon
confirmation using the Apply button.
• DHCP (default) - Selects automatic IP address assignment from the LAN
DHCP server. If a DHCP server cannot be found, it fails over to the static IP
address.
• Static - Assigns a static IP address manually. The factory default static IP
address: 192.168.0.1.
IP Address - IP Address determines a static IP address to be used for TCP/IP
networking. Consult your network administrator about how to set this value.
• If IP Address Type is set to DHCP, the IP address is set automatically by the
network DHCP server and cannot be entered here.
• If IP Address Type is set to Static, enter an IP address compatible with
your LAN here. Also enter a netmask and default gateway address in the
following two parameters. Click Apply when you are ready to apply all three
entries.
• If IP Address Type is set to DHCP and there is a DHCP failure, the IP address is
set to the static IP address.
Netmask - Netmask determines the subnet mask to be used for TCP/IP
networking.
• Enter a subnet mask compatible with your LAN. This is only needed for
Static IP configurations. The factory default Subnet Mask is 255.255.255.0