AJA Video Systems Inc IPR-10G-HDMI, Инструкция по установке и эксплуатации

Страница: 38 / 67

10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.1 38 www.aja.com
• Audio 2 Destination Address
• Audio 2 Source Address
Manual - When Manual is selected, you must enter configuration parameters
manually into the following Input Stream Selection fields:
• Video Input Format
• Audio Channels
• Audio Packet Interval
• Video Destination Address
• Video Source Address
• Audio Destination Address
• Audio Source Address
• Video 2 Destination Address
• Video 2 Source Address
• Audio 2 Destination Address
• Audio 2 Source Address
NMOS/Ember -
When NMOS/Ember is selected, the unit announces its presence
to the network and the controller registers that it is there and what its
capabilities are. Input stream selection occurs through network discovery and
communication with facility automation.
Figure 29. IPR-10G2-HDMI Config Screen 3 of 3
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
JG­IPR­10G2­HDMI
Video2 Destination Address
Input Stream Selection
Hitless Media Support
­ Ignore ­
Video 2 Source Address
Input Stream Selection
Hitless Media Support
­ Ignore ­
Audio 2 Destination Address
Input Stream Selection
Hitless Media Support
­ Ignore ­
Audio 2 Source Address
Input Stream Selection
Hitless Media Support
­ Ignore ­
Video Signal Generator
Off
Audio Signal Generator
Off
Audio Delay
0 Milliseconds
HDMI Audio Mode
Auto
Analog Audio Channels
Channels 1 & 2
NMOS Enable
Enable
Ember+ Enable
Enable
Connection
Serial Number
ENG003
Software Version
2.1.0.15d
Connection Status
Connected
Network
CY­ IPT­10G2­SDI
CY­IPR10G2­HDMI
CY­IPR10G2­SDI
CY­IPT­10G2­HDMI
GC­IPR10G2SDI
GC­IPT­10G2­SDI­E…
IPR­10G­1PR030114
IPR­10G­1PR030310
IPR­10G­ENG010
IPT­10G2­SDI­ENG…
IPT­10G2­SDI­ENG…
JG­IPR­10G2­HDMI
SL­IPT­10G2­SDI
Video Signal Generator
You can output a test video signal to validate video signal connections. Select Off
or Test Pattern.
Off -
No video signal is generated.
Test Pattern -
Color bars with a moving gray line are generated in the currently
selected video format and sent to the Video Output.