AJA Video Systems Inc IPR-10G-HDMI, Инструкция по установке и эксплуатации

Страница: 35 / 67

10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.1 35 www.aja.com
Ember+
Enable or disable Ember+ network discovery for the device.
IPR-10G2-HDMI
The IPR-10G2-HDMI Config Screen, shown in three parts, has the parameters
required for the general operation of the IPR-10G2 units.
Figure 27. IPR-10G2-HDMI Config Screen 1 of 3
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
JG­IPR­10G2­HDMI
Config Page
System Name
JG­IPR­10G2­HDMI
User Authentication
Disabled
Identify LED
Off
UPnP Host
Enable
IGMP Version
V3
Video Output Clock Selection
PTP
PTP Domain
Video Output Clock Selection
0
PTP Preferred Grandmaster ID
Video Output Clock Selection
­none­
PTP Grand Master Capable
Video Output Clock Selection
Disable
Hitless Media Support
Enable
Hitless Window Size(ms)
Hitless Media Support
30
Connection
Serial Number
ENG003
Software Version
2.1.0.15d
Connection Status
Connected
Network
CY­ IPT­10G2­SDI
CY­IPR10G2­HDMI
CY­IPR10G2­SDI
CY­IPT­10G2­HDMI
GC­IPR10G2SDI
GC­IPT­10G2­SDI­E…
IPR­10G­1PR030114
IPR­10G­1PR030310
IPR­10G­ENG010
IPT­10G2­SDI­ENG…
IPT­10G2­SDI­ENG…
JG­IPR­10G2­HDMI
SL­IPT­10G2­SDI
System Name
Defines a name for the system and gives it a unique identifier. This name is used
when displaying systems through the web interface.
User Authentication
Enable or disable user password authentication for the web interface.
Identify LED
Enables flashing of the Ethernet LEDs on the unit.
UPnP Host
Enable or disable network discovery using Universal Plug and Play.
IGMP Version
Select the Internet Group Management Protocol Version. AJA supports IGMP v2
and v3.
NOTE: It is important to know which version of IGMP is in use on your network.
Selecting the wrong IGMP version may cause long delays in processing multicast
subscriptions. See your network engineer for more information.