11
AIYI Technologies
▎
Power off: Press and hold the power button to enter the shutdown interface.
All the indicator lights are turned off, the detector enters the shutdown countdown,
and the display is turned off from OFF 004 to OFF 000. After the countdown ends, the
display is turned off, and the Green indicator keep flashing for about 10 seconds,
then the instrument is turned off.
2
.
3 Daily use
▎
Factory reset: After the boot process is displayed, the detector enters the facto-
ry reset interface. If you need to restore the factory settings, press the function
button twice in rapid succession, otherwise the detector will automatically enter the
main interface.
▎
Main interface: The main interface is mainly used to display: gas name, gas
concentration, alarm type, time and battery status. The green indicator flashes at this
time.
▎
Fault indication: When the gas sensor is shorted or broken, the corresponding
detection channel has a fault indication, as shown in the figure below. At this point,
the green indicator is off and the yellow fault indicator is keeps on.
Shutdown interface
Factory reset interface
Main interface
