background image

ENGLISH  

12

C

En

A

PROGRAMMED PLAY

Up to 30 tracks can be programmed from any of the inserted
discs.

Use the remote control.

1 Press the PRGM button twice in stop mode.

“PGM” appears on the display.

• When the PRGM button is pressed once in step 1, the unit

enters the KARAOKE PROGRAMS (page 18).

2 Press the DIRECT button, then press one of the

numeric buttons 1 to 5 within 3 seconds to select
a disc.

The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.

3 Press the numeric buttons and the +10 button to

program a track.

Example:

To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.

     

4 Repeat steps 2 and 3 to program other tracks.

5 Press the 

k

 button to start play.

To check the program

Each time the 

c

 or 

d

 button is pressed in stop mode, a

disc number, track number, and program number will be
displayed.

To clear the program

Press the 

a

CLEAR button in stop mode.

To add tracks to the program

Before playing, repeat steps 2 and 3. The track will be
programmed after the last programmed track.

To change the programmed tracks

Clear the program and repeat all the steps again.

During programmed play, the EDIT/CHECK, DISC CHANGE,
RANDOM, DIRECT and numeric buttons do not function.

Replacing discs during play

While one disc is playing, the other discs can be replaced without
interrupting  play.

1

Press the DISC CHANGE button.
Two discs can be replaced.

2

Remove the discs and replace with other discs.
To  replace the other two discs, press the DISC CHANGE
button again.

3

Press the 

f

OPEN/CLOSE button to close the disc

compartment.

• When loading an 8-cm (3-inch) disc, make sure to place it onto

the inner circle of the tray precisely.  Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa dealer for repair.

• Do not place more than one compact disc on one disc tray.
• Do not tilt the unit with discs loaded.  Doing so may cause

malfunctions.

• When transporting the unit, remove the discs from the trays.
• When replacing the discs during play, do not replace discs other

than those facing you.
If you place a disc on the empty right inner tray, and then press
the 

f

OPEN/CLOSE button, ”ERROR” is displayed and the

disc compartment may not close.  Remove the disc on that
tray.

RANDOM PLAY

All the tracks on the selected disc or on all the discs can be
played randomly.

Press the RANDOM button on the remote control.

RANDOM lights up on the display.
To cancel random play, press again.

• Even if the 

c

  button is pressed during random play, a

previously played track cannot be skipped. The unit returns to
the beginning of the current track only.

• Direct selection of the tracks with the numeric buttons is not

possible.

REPEAT PLAY

A single disc or all the discs can be played repeatedly.

Press the REPEAT button on the remote control.

A

 lights up on the display.

To cancel repeat play, press again.

CD PLA

YING

Never place here.

Total playing time of
the selected tracks

Program number

Total number of
selected tracks

Selected track number

Содержание Z-M260




























Отзывы: