– 5 –
Fig. 3-3
High-voltage cable
Anode cap
(3)
Eliminate twisting, etc. of the high-voltage cable and
arrange it so that no twisting occurs. (See Fig. 3-3)
Caution : If the cable is not arranged correctly, the
anode cap could turn and cause an
installation defect.
(4)
Turn over the rubber cap symmetrically on the left and right.
(See Fig. 3-4)
Caution : Take great care not to damage the anode cap.
(5)
Fit your forefinger over the projection at the center of the
cap and hold the cap between your thumb and middle
finger. (See Fig. 3-5)
Fig. 3-4
Fig. 3-5
