manualshive.com logo in svg

Aiwa TV-AN1410, Руководство по обслуживанию

Поделиться
Скачать
Aiwa TV-AN1410 Скачать руководство пользователя страница 17

– 17 –

3-1.   SUB  BRIGHT   Sub-brightness Adjustment /

Adjustment Menu Screen : PAGE 3-2 (Make sure of the order)

Input signal : Color bar (Stair step)
Measuring instrument : Pattern generator / Leader : LCG-404

1. Using the volume keys on the jig remote controller, adjust the scale of

the second last from right to be slightly brightened. (Fig. 3-1)

3-2.   SUB  CONTRAST   Sub-contrast  Adjustment /

Adjustment  Menu Screen : PAGE 3-1

Input signal : Color bar  (QIW)
                      Chroma / Off
Measuring instrument : Oscilloscope
Pattern generator / Leader : LCG-404
Test point : TP903/NK  C.B.

1. Connect oscilloscope to TP903.
2. Using the volume keys on the jig remote controller, adjust the

voltage between pedestal level and 100% white to 80V 

±

 2.0V as

shown in the Fig. 3-2.

Drive Adjustment :

2-3. Using the volume keys on the jig remote controller, adjust the figure of   4. G  DRIVE   to more than 200 until the screen becomes a greenish

color.

2-4. Reduce the figure to the point where the greenish color disappears.
2-5. Using the volume keys on the jig remote controller, adjust the figure of   5. B  DRIVE   to more than 200 until the screen becomes bluish color.
2-6. Reduce the figure to the point where the bluish color disappears.
2-7. Repeat the above process of 2-1 to 2-6 for several times to adjust the screen whiter.

Focus Adjustment:

Input signal : Dot pattern
Adjustment point : SFR located at upper part of FBT (T601)
Measuring instrument : Pattern generator / Leader : LCG-404

• Adjust SFR which is located at upper part of FBT (T601) in order to get the best focus point for the dot.

Fig.2-2

PAGE  3

2 SUB BRIGHT

35

2nd from right

Fig.3-1

3. Screen Adjustment:

Input signal : No signal (No raster)
Adjustment point : SFR located at lower part of FTB (T601)
Measuring instrument : Pattern generator / Leader : LCG-404

1.

Enter to the “Adjustment Menu Screen” by using the jig remote controller.

2.

Press “0” key of the 10 numeric channel keypad to get a horizontal single
line screen. (Fig. 2-2)

3.

Adjust SFR located at the lower part of FBT (T601) until the horizotal line
starts to be slightly brightened.

4.

Repeat the process of Step 2. and return to the “Adjustment Menu Screen”.

75%white

100%white

Pedestal level

Fig. 3-2

80V

±

2.0V

Содержание TV-AN1410





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды