6
Maximum length of the interface cable
The total length of the interface cable from the computer to the tape drive and from
the tape drive to the printer should not be more than 10 feet (3 meters).
It is not possible to use the printer and tape drive at the same
time.
If you attempt to print while using the tape drive, the tape drive will give an error and
stop operating, and the printed results cannot be guaranteed. The effect of
attempting to use the tape drive during printing is similar.
When turning on the computer
Be sure to turn on the tape drive first before turning on the computer; otherwise the
computer cannot control the tape drive and a printer or any other device connected
to the tape drive.
If the monitor screen was distorted
The PC monitor screen might be distorted if you put this tape drive near the monitor.
In this case, set this tape drive more than 5 inches (12.7cm) away from the monitor.
Important Notes on Operation
