Aiwa NSX-R17 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 53

background image

-5-

NOTE ON BEFORE STARTING REPAIR -1/2

1. Forced discharge of electrolytic capacitor of power supply block

When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across the
electrolytic capacitors (C101, 102) even though AC power cord is removed. If repair is attempted in this condition, secondary defect can occur.
In order to prevent the secondary trouble, perform the following measures before starting repair work.

Discharge procedure

1 Remove the AC power cord.
2 Connect a discharging resistor at an end of lead wire that has

clips at both ends. Connect the other end of the lead wire to
metal chassis.

3 Contact the other end of the discharging resistor to the

positive (+) side (+VH) of C101. (For two seconds)

4 Contact the same end of the discharging resistor as step 3 to

the negative (-) side (-VH) of C102 in the same way.
(For two seconds)

5 Check that voltage across C101 and C102 has decreased to

1 V or less using a multimeter or an oscilloscope.

Select a discharging resistor referring to the following table.

Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check the reference numbers

of the charging capacitors on schematic diagram before starting the discharging work.

2. Check items before exchanging the MICROCOMPUTER

Be sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirming that the
MICROCOMPUTER is surely defective.

2-1. Regarding the HOLD terminal of the MICROCOMPUTER

When the HOLD terminal (INPUT) of the MICROCOMPUTER is "H", the MICROCOMPUTER is judged to be operating correctly.
When this terminal is "L", the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLD terminal before
exchange.
When the MICROCOMPUTER is not defective, the HOLD terminal can also go "L" when the POWER AMPLIFIER has any abnormalities
that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to "L".

• Good or no good judgement of the MICROCOMPUTER
1 Turn on the AC main power.
2 Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the "H" level or not.
3 When the HOLD terminal is "L" level, the abnormality detection circuit is judged to be working correctly and the MICRO

COMPUTER is judged to be good.

Fig-1

MAIN C.B

D101

C101

C102

3

4

2

2

Charging voltage (V)

Discharging

Rated power (W)

Parts number

(C101, 102)

resistor ( )

25-48

100

3

87-A00-247-090

49-140

220

5

87-A00-232-090

«
...
3
4
5
6
7
...
»

Содержание NSX-R17






















































Отзывы:

Нет отзывов

Похожие инструкции для NSX-R17

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 16

Бренд: Galcon Страницы: 20

Бренд: Oakley Sound Страницы: 15

Бренд: Oasis Страницы: 18

Бренд: RCF Страницы: 18

Бренд: ascon Страницы: 8

Бренд: Bose Страницы: 44

Бренд: Sure Heat Страницы: 10

Бренд: Nady Systems Страницы: 6

Бренд: Q-See Страницы: 10

VM9212N - Multimedia CD/DVD Receiver

Бренд: Jensen Страницы: 32

COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM

Бренд: MAYBACH Страницы: 319

Бренд: EAW Страницы: 2

Бренд: JAMO Страницы: 72

Бренд: Watts Страницы: 24

Бренд: b-red Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды