20
ENGLISH
SPECIFICATIONS
MAIN UNIT
FM tuner section
Tuning range
87.5 MHz to 108 MHz
Usable sensitivity (IHF)
13.2 dBf
Antenna terminals
75 ohms (unbalanced)
AM tuner section
Tuning range
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity
350 µV/m
Antenna
Loop antenna
Amplifier section
Power output
5.5 W + 5.5 W
(100 Hz to 15 kHz, THD less than
1%, 4 ohms)
7 W + 7 W
(100 Hz to 15 kHz, THD less than
10%, 4 ohms)
Input
AUX: 500 mV
Outputs
SPEAKERS: accept speakers of
4 ohms or more
PHONES (stereo minijack):
accepts headphones of 32 ohms or
more
Cassette deck section
Track format
4 tracks, 2 channels stereo
Frequency response
Normal tape: 50 Hz – 15000 Hz
Recording system
AC bias
Heads
Recording/playback
×
1
Erase head
×
1
Compact disc player section
Laser
Semiconductor laser (
λ
= 780 nm)
D-A converter
1 bit linear
Wow and flutter
Unmeasurable
SPEAKER SYSTEM
Speakers
100 mm cone type
Impedance
4 ohms
Dimensions (W
×
H
×
D)
140
×
231.5
×
198 mm
(5
5
/
8
×
9
1
/
8
×
7
7
/
8
in.)
Weight
1.1 kg
(2 lbs 7 oz)
GENERAL
Power requirements
120V AC, 60 Hz
Power consumption
26 W
Dimensions of main unit
160
×
231.5
×
197 mm
(W
×
H
×
D)
(6
3
/
8
×
9
1
/
8
×
7
7
/
8
in.)
Weight of main unit
2.5 kg
(5 lbs 8 oz)
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause har mful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
