12
ENGLISH
TAPE
PLAYBACK
OPERATION
TAPE/
REV MODE
z
PUSH
EJECT
f
,
g
s
s
a
f
,
g
d
l
a
INSERTING TAPE
• You can select a reverse mode to play back one or both sides.
• Use only type
I
(normal) tapes.
Press TAPE/REV MODE and press the
z
PUSH
EJECT position to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode
Each time TAPE/REV MODE is pressed, the reverse mode
changes.
p
( )
[
( )
]
( )
To play one side only, select
p
.
To play from front side to back side once only, select
[
.
To play both sides repeatedly, select
]
.
PLAYING BACK A TAPE
Insert a tape. Then press
d
to start play.
c
: The front side is being played (forward).
x
: The back side is being played (reverse).
To stop play, press
s
.
To pause play, press
a
. To resume play, press again.
To change the playback side, press
d
in play mode.
To fast forward or rewind, press
f
or
g
in stop mode.
Then press
s
to stop the tape.
To start play when the power is off (Direct Play
Function)
Press TAPE/REV MODE. The power is turned on and play of
the inserted tape begins.
To set the tape counter to 0000
Press
s
in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
The tape counter indicates
the tape running length.
Playback side of the tape
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
To record on the tape again, cover the tab openings with
adhesive tape, etc.
• 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
• Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
Side A
Tab of
side A
