Aiwa CSD-A500, Руководство по эксплуатации

Страница: 18 / 64

18 GB
Waking up to music/
alarm
You can wake up to music, a radio
programme or alarm sound at a preset time.
Make sure that you have set the clock
(“Setting the clock” on page 17).
x ENTER
. , >
OPERATE
VOLUME
+
,
–
ALARM/TIMER
SNOOZE
1
Press OPERATE to turn on the player.
2
Set the function switch to CD, RADIO
or TAPE.
When TAPE is selected, the player
functions as an alarm clock generating
beep sound at a specified time.
3
When CD or RADIO is selected,
prepare the music source you want to
play.
To play Do this
radio Tune in a station.
a CD Insert a CD.
4
Hold down ALARM/TIMER until the
hour digits flash.
Timer Alarm
5
Set the timer to the hour you want the
music or alarm to start by pressing
.
or
>
, then press
x
ENTER.
The hour stops flashing and the minutes
start flashing.
Set the minutes by pressing
.
or
> , then press x ENTER.
6
Press or – to set the
volume, then press
x
ENTER.
When TAPE (alarm function) is
selected, the alarm volume stays at a
constant level even if you increase/
decrease the setting.
7
Press OPERATE to turn off the player.
The timer (“
c ”) or alarm (“ ”)
indication remains lit in the display.
At the preset time, the power will go on,
and the music or alarm will start.
Then, after 60 minutes have passed the
power will go off and the player will
enter the standby mode again.
To check/change when the
playback/alarm will start
Press ALARM/TIMER until the hour digit
flashes in the display, then press
x
ENTER.
Each time you press
x
ENTER, a stored
setting is displayed in the set order.
To change the setting, display the setting you
want to change and re-enter it.
Function switch