Aitchison Reese Agri UFO SEEDKING Professional, Руководство пользователя, Страница: 29 / 42

27
GENERAL MAINTENANCE
The SK2122 seed drill has been designed with minimal maintenance
in mind reducing down time and increasing productivity.
However close observation should be kept on all moving parts, this
will prevent costly repairs in the long run.
MACHINE GREASE POINTS
Grease Points. No. of Nipples. Greasing Regularity.
Rear Axle Main Pivot 2 10 hours
Rear Hydraulic Rams 2 10 hours
Drawbar Main Pivot 2 10 hours
Seed Drive Shaft Axle 1 100 hours
Fertiliser Drive Shaft Axle 1 100 hours
Granule Drive Shaft Axle 1 100 hours
Stabiliser Wheels 2 100 hours
Keep all adjustment threads corrosion free by periodically coating
with copper coating. (Grease tends to attract dust).
Greasing location points are labelled on
the drill with”GREASE” decal as shown.
Chains should be kept lubricated with
chain oil and should be thoroughly
cleaned once a season.
All the Discs and Press Wheels should be checked daily for any sign
of play in their bearings and adjusted if needed to prevent costly
bearing replacement.
Check that all Dust Caps are in place and replace if damaged of
missing.
Check the Press Wheel Pivot Arms for side-ways movement and
tighten their pivot bolts when needed.