Aitchison Reese Agri UFO SEEDKING Professional, Руководство пользователя, Страница: 19 / 42

17
MAKING ADJUSTMENTS
There are three bolts used to adjust the Boot; One main bolt M16 x 40
(24mm head), which is used to adjust the boot up/down and two M12 x
20 (19mm head) to adjust the boot in/out from the disc.
M12 Bolt M12 Bolt M16 Bolt
To make adjustment to the Boots raise the drill up using the
hydraulics.
Ensure that the transport locks are locked .
(Rear lock on Rear Transport Axle, Valve on front Drawbar Ram.)
All three of these adjustments can be made from under the drill.
To make an in/out adjustment use the custom made 19mm spanner supplied
with the seed drill.
It is important that these two M12 bolts are tight after completing adjustments.
(Bolts should be tightened against each other).
To make a up/down adjustment loosen of the M16 bolt enough
that enable the complete Boot assembly to move.
When the boot is at the correct height retighten the bolt ensuring
that the lock washer is located in the notches provided.