Switching-on the iTool
After having prepared the iTool according to this Ope-
ration Manual first switch-on the iTool, then the Light
Source by pressing the power switches.
Flip open the top of the iTool. The boot sequence is
visible on the TFT Display.
Switch off the iTool
(but not the Light
Source)
when
connecting a new
device or chan-
ging the device
and switch it on
afterward
Menu Structure and Operation
After having followed the steps before you may start
inspection now.
Using the control panel you can select and control
functions. A detailed description can be found on
pages 12/13.
Starting Inspection
