AIT HSDV 12.1M3, Руководство по эксплуатации

Страница: 20 / 44

20
Subject to technical amendments without prior notice | 83059300iUK | ait-deutschland GmbH
Accessories for heat pump type HSDV 9M1/3 HSDV 12.1M3
Air/water 8 kW output-controlled | Air/water 12 kW output-controlled • yes – no – | – – | –
Air/water dual output-controlled • yes – no • •
Air/water 7 kW to 8 kW output-controlled | Air/water 10 kW to 18 k Outdoor installation • yes – no – | – – | –
Air/water 9 kW to 14 kW RX Outdoor installation • yes – no – –
Air/water dual Outdoor installation • yes – no – –
Air/water dual RX Outdoor installation • yes – no – –
Installation location
Room temperature min. | max. °C 5 | 35 5 | 35
Relative humidity % 60 60
Sound
Sound pressure level at 1 m distance inside dB(A) 33 33
Sound power level inside dB(A) 46 46
Heating circuit
Flow rate: minimum | maximum (see heat pump for pipe dimensioning) l/h | l/h 700 | 1600 700 | 1600
Free pressing | Pressure loss | Flow rate bar | bar | l/h 0,65 | – | 1150 0,81 | – | 1150
Max. allowable operating pressure bar 3 3
Circulation pump control range min. | max. l/h 600 ı 1200 600 ı 1900
General unit data
Total weight kg 150 161
Weight of individual components kg | kg | kg – | – | – – | – | –
Domestic hot water tank
Net volume l 180 279
Magnesium sacrificial anode Impressed current | Magnesium • yes – no – | • – | •
Domestic hot water temperature, heating pump mode | Electric heating element up to °C | up to °C 60 | 65 60 | 65
Mixed water quantity according to ErP: 2009/125/EC (at 40 °C, draw-off of 10 l/min) l 230 365
Standing loss according to ErP: 2009/125/EC (at 65 °C) W 55 66
Maximum pressure | Operating pressure bar | bar 6 | 10 | 13 6 | 10 | 13
Electrics
Voltage code | all-pole fuse protection for heat pump *)**) 1 phase … | A 1~N/PE/230V/50Hz | B16 1~N/PE/230V/50Hz | B16
Voltage code | all-pole fuse protection for heat pump *)**) 3 phases … | A – | – – | –
Voltage code | Control voltage fuse protection **) … | A 1~N/PE/230V/50Hz | B16 1~N/PE/230V/50Hz | B16
Voltage code | Electric heating element fuse protection **) 1 phase … | A 1~N/PE/230V/50Hz | B25 – | –
Voltage code | Electric heating element fuse protection **) 3 phases … | A 3~N/PE/400V/50Hz | B10 3~N/PE/400V/50Hz | B16
Degree of protection IP 20 20
Residual current circuit breaker if required type B B
Electric heating element output 3 | 2 | 1 phase kW | kW | kW 6 | 4 | 2 9 | 6 | 3
Circulation pump power consumption, heating circuit min. | max.
W 4 | 75 4 | 75
Other unit information
Safety valve Heating circuit | Response pressure included in scope of supply: • yes – no | bar • | 3 • | 3
Buffer tank | Volume included in scope of supply: • yes – no | l • | 62 • | 83
Diaphragm expansion vessel Heating circuit | Volume | Prepressure incl. in scope of supply: • yes – no | l | bar • | 12 | 1,5 • | 12 | 1,0
Overflow valve | Changeover valve, heating -Domestic hot water integrated: • yes – no • | • • | •
Vibration decoupling, Heating circuit | Heat source included in scope of supply or integrated: • yes – no – –
Controller | Heat quantity recording | Extension board included in scope of supply or integrated: • yes – no • | • | – • | • | –
813324a 813327b *) compressor only, **) note local regulations
Technical data / Scope of supply HSDV…