![Aisle-Master Bendi Скачать руководство пользователя страница 24](http://html.mh-extra.com/html/aisle-master/bendi/bendi_operating_2880466024.webp)
5.
Lift the load to the required height and use the tilt to level the forks.
6.
Turn the steering wheel/forks towards the space/stack (anticlockwise for
LHS). Stop turning when the near front corner of the load (item 1)
[30]
is
approximately 100mm (4 inches) from the face of the rack/stack.
7.
Set the direction lever to reverse. Slowly reverse the truck and
simultaneously turn the steering wheel/load towards the space
(anticlockwise for LHS) until the near front corner of the load clears the
racking
[31]
. Stop and set the direction lever to neutral.
8. Continue turning the steering wheel/load towards the space (anticlockwise for
LHS) until the load is centred with the space
[32]
.
Note:
When turning the steering with the truck stopped do not apply the foot
brake or the park brake.
9.
Set the direction lever to forward. Drive the truck forward towards the
space/stack and simultaneously turn the steering wheel/load (clockwise
for LHS) so that the load stays aligned parallel and central to the sides of
the space/stack
[33]
. Use the side shift to centre the load if necessary.
10.
Position the load in the space or over the stack
[33]
, set the direction lever
to neutral and lower the load until it sits firmly on the rack/stack.
Continue to lower the forks until they are clear of the bottom of the load
(item 1)
[34]
.
11.
11. Use the tilt to level the forks if required.
12.
12. Set the direction lever to reverse. Slowly reverse the truck and
simultaneously turn the steering wheel/forks (anticlockwise for LHS) so
that the forks stay aligned parallel and central to the sides of load/pallet
[35]
. Use the side shift to centre the forks with the load/pallet if
necessary.
13.
13. When the front of the forks (item 1)
[35]
clear the rack/stack, stop
reversing and turn the forks away from the rack/stack (clockwise for
LHS)
[36]
.
14.
14. Lower the forks until they are 100 to 150mm (4 to 6 in.) off the
ground. Set the direction lever to forward and slowly drive the truck
forward while using the steering to straighten the truck in the centre of
the aisle
[37]
. Drive to the next location observing the safety rules
previously stated.
Содержание Bendi
