Aisle-Master Bendi, Руководство по эксплуатации

Страница: 15 / 28

8. Set the direction lever to forward. Drive the truck forward towards the
load and simultaneously turn the steering wheel/forks (clockwise for
LHS) so that the forks stay aligned parallel and central to the sides of the
load/pallet to be lifted
[17] . Use the side shift to centre the forks with the
load if necessary
9. Lift the load just enough to clear the rack/floor, otherwise it may catch on
the rack above.
10. Set the direction lever to reverse. Slowly reverse the truck and
simultaneously turn the steering wheel/forks (anticlockwise for LHS) so
that the load/pallet stays aligned parallel and central to the sides of
adjacent loads/pallets
[18] . Use the side shift to centre the load with the
adjacent pallets if necessary.
11. Note:
If there is not enough clearance to remove the load/pallet drive
forward and try the removal process again. To get more clearance,
don’t start turning the forks until you have backed out 200 to 400mm
(8 to 16 in.)
12. When the front right hand corner of the load (item 1) [18] clears the
racking, stop reversing and turn the steering wheel (clockwise for LHS)
to align the sides of the load/pallet with the sides of the aisle.
13.
Lower the forks until they are 100 to 150mm (4 to 6 in.) off the ground
and slowly drive the truck forward while using the steering to straighten
the truck in the centre of the aisle. Drive to the next location observing
the safety rules previously stated