Aisin AXGP224E1, Техническое руководство, Страница: 99 / 126

3
TWIN unit
AWS 40 HP – E1J AWS 50 HP – E1J
16+16 HP 16+20 HP 20+20 HP 16+25 HP 20+25 HP 25+25 HP
Capacity code of the connected GHP outdoor unit P900 P1010 P1120 P1160 P1270 P1420
Rated cooling capacity
∗
kW 82,0 93,0 104,0 104,0 115,0 126,0
Water temperature (out – in)] °C 7 – 11 7 – 11,5 7 – 12 7 – 11 7 – 11,5 7 – 12
Min. supply water temperature °C 6
Rated heating capacity
∗∗
kW 95,0 107,5 120,0 122,5 135,0 150,0
Water temperature (out – in) °C 45,5 – 41 45,5 – 40,5 45,5 – 40 45,5 – 41 45,5 – 40,5 45,5 – 40
Max. supply water temperature °C 47
Flow rate m
3
/h 19,0 24,0
Capacity modulation range cooling. (min-max) kW 17,0 – 82,0 17,0 – 93,0 17,0–104,0 17,0–104,0 17,0–115,0 17,0–126,0
Capacity modulation range heating (min-max) kW 19,8 – 95,0 19,8–107,5 19,8–120,0 19,8–122,5 19,8–135,0 19,8–150,0
Unit without
pump
(AWS E1J)
Power supply V/Ph/Hz 230/1/50
Power consumption W 250
Starting current A 1,5
Plate heat exchanger pressure drop kPa 33 33 33 46 46 46
Water
circuit
Water connections Inch 2,5 (flange connection DN 65 – EN 1092 1/13)
Primary circuit pipe size Inch
2,5 or higher
(Each AWS unit is fitted with a 2,5” Y strainer to be installed on the primary circuit)
Refrigerant
circuit
Refrigerant gas connection
(gas – liquid)
mm 2 x 28,6 – 2 x 18,0
GHP 1 – AWS
pipe size
(gas – liquido)
mm
28,6–15,88
***(19,05)
28,6–15,88
***(19,05)
28,6–15,88
***(19,05)
28,6–15,88
***(19,05)
28,6–15,88
***(19,05)
35,0–15,88
***(19,05)
GHP 2 – AWS
pipe size
(gas – liquido)
mm
28,6–15,88
***(19,05)
28,6–15,88
***(19,05)
28,6–15,88
***(19,05)
35,0–15,88
***(19,05)
35,0–15,88
***(19,05)
35,0–15,88
***(19,05)
Dimensions
and weight
Height mm 915
Width mm 710
Depth mm 1.020
Weight kg 230
Conectable GHP outdoor units 2
∗
Rated cooling capacity is measured according to the following conditions: water outlet temperature 7°C; outdoor temperature 35°C DB
∗∗
Rated heating capacity is measured according to the following conditions: water outlet temperature 47°C; outdoor temperature 7°C DB / 6°C WB
∗∗∗
If the distance between GHP and AWS exceeds 40 meters, install a pipe with the diameter indicated in brackets.
1.1 Installation prescriptions
CAUTION
Always foresee the installation of an emergency relief valve and a properly
dimensioned expansion vessel. These devices are not built in the AWS unit.
Where the storage tank should be installed lower than the AWS unit, foresee the
installation of a jolly valve at the higher point of the water piping.
Failure to observe these prescriptions could result in malfunction and/or damage to the
unit.
Always foresee the installation of a buffer tank, fitted with anti stratification
pipes, which size should be adequate to the AWS unit capacity.
Failure to observe these prescription could result in malfunction and/or damage to the
unit.
Always check that the Y-shape water filter (supplied with the unit) is installed on
the primary circuit return pipe. In case of multi units plants, install one filter each
AWS unit. Install the filter to not less than 50 cm from suction of the pump.
Failure to observe this prescription makes the warranty no longer valid and could result
in malfunction and/or damage to the unit.
WARNING
Welding, refrigerant gas and water piping installation should be always
performed by specialised technical personnel in accordance with instructions
and prescriptions mentioned in the present manual.
Failure to observe this prescription makes the warranty no longer valid and could result
in malfunction and/or damage to the YOSHI AWS unit.
1 AWS unit specifications