5)
Select the program to configure
, by using selection arrows
and
confirm with a short press on icon
. Non-configured programs (not configured yet)
will blink while configured programs will stay still.
Note: Take into account when configuring programs the priorities.
6)
If a time program already exists, SuperMaster controller will display
icon. Otherwise it
will display time unconfigured
:
. Press
icon either to modify or to set the
starting time.
7)
Digits will appear to define the starting time. The value to be set will be blinking (hours
and minutes). Use selection arrows
to select the desired time a confirm by a short
press on the
icon.
8)
Follow by configuring the imposition mode: Forced
, Semi-Forced
and Free
. Select with selection arrows
and confirm by pressing
icon.
9)
Select set-point temperature between
º-
º
,
y
using selection arrows
or
the operation mode by directly pressing short on it. Confirm selection with a short press
on
icon.
10)
At last, configure the ending time. The system automatically offers an ending time 30
minutes after the configured starting time. For temperature programming, you can select
values between
º-
º
,
and
. For air conditioning mode programming you can
select any mode. The value that should be defined (hours and minutes) will be flashing.
Use the arrows
to select the desired value and press
to confirm.
Note:
For the program to be stored, every step must be accomplished. If not, the program will not be
saved. If, while programming, no press is done on the touch-screen for a period of two minutes, it will exit
automatically from the menu to the stand-by screen.
11)
Exit programming menu without saving at anytime by pressing on the icon
.
36
